Service area
Service area
We cover South Melbourne and the neighbouring suburbs between the bay and the river.
- Albert Park
- Middle Park
- Port Melbourne
- Southbank
- St Kilda
- St Kilda West
- South Wharf
- Docklands
- Melbourne
- Windsor
Dust caked onto the blades of a blower wheel reduces the volume of air it can move and can cause imbalance. We clean the fan wheel and housing where safe access allows, then confirm the fan runs smoothly before the system is closed up.
The blower is the component that actually moves the air. In ducted gas heaters and indoor air conditioning units, it is usually a squirrel-cage wheel: a drum of narrow, curved blades spinning inside a scroll housing. Those blades are shaped precisely to push air efficiently. When fine dust and lint coat their leading edges, the curve flattens out, the wheel moves less air at the same speed, and uneven deposits can throw it slightly out of balance, which you might hear as a hum or vibration.
We clean the blower where safe access allows, after isolating power to the unit. Depending on the design, that means cleaning the wheel in place with brushes and extraction, or removing the blower assembly so the wheel and housing can be cleaned more thoroughly. Each blade is worked individually, since compacted dust tends to sit in the cup of the blade where a quick vacuum will not reach. The housing and the area around the motor are cleaned at the same time.
Once the assembly is refitted, we run the fan and listen and watch for smooth rotation. If bearings sound worn, the motor seems to be struggling or the wheel is damaged, we note it so your heating or air conditioning technician can follow up. Cleaning will not fix a mechanical fault, but it removes one common cause of reduced airflow.
Blower blades are curved to scoop and push air. Dust builds up on the inside of each blade, filling the curve and changing its shape. The fan still spins at the same speed but moves less air, so outlets feel weaker. Cleaning restores the blade profile and much of the lost airflow.
Yes, where access is safe. Most ducted gas heaters have a blower compartment separate from the burner section. We only clean the air side and do not adjust or service the gas components, which should be handled by a qualified gas fitter as part of the heater's regular servicing.
Tell us a little about your system and we will come back to you with a free quote.
How it works
We check the indoor unit, filter, accessible ductwork and outlets to understand the system layout and how much build-up there actually is before quoting the work.
Power to the system is switched off, outlets are sealed and the HEPA extraction unit is connected to place the ductwork under negative pressure.
Coil, fan, returns, supply ducts and diffusers are cleaned in sequence, with each section brushed and extracted before we move on to the next.
We refit components, restart the system, check airflow at the outlets and talk you through what was cleaned and anything that needs attention.
Service area
We cover South Melbourne and the neighbouring suburbs between the bay and the river.
Send us the details of your system and property, and we will reply with a free quote and a suggested scope of work.
